Keurig K-Supreme Plus Troubleshooting: Quick Fixes (2024)

For troubleshooting the Keurig K-Supreme Plus, check if the machine is overfilled or if incorrect pods were used. Make sure there is no debris clogging the needle, and empty the drip tray.

Ensure that the recommended amount of water is in the reservoir. If the machine is still not brewing properly, clean the K-Cup pod holder and descale the brewer. If the problem persists, contact customer service. Slow brewing may be caused by a clogged needle or a dirty water reservoir.

Some users have reported issues with water pump failures and difficulty connecting to WiFi.

1. Keurig K-supreme Plus Not Brewing

If your Keurig K-Supreme Plus is not brewing, there could be a few potential issues causing this problem. Here are some troubleshooting steps you can follow to resolve the issue:

Check Water Reservoir For Proper Fill Level

Make sure the water reservoir of your Keurig K-Supreme Plus is filled to the recommended level. The machine may not brew if the reservoir is overfilled or if there is not enough water in it. Check the fill level and ensure it meets the exact recommended amount.

Ensure Correct Pods Are Being Used

Using the correct pods is crucial for the brewing process. Make sure you are using Keurig-compatible pods that are specifically designed for the K-Supreme Plus model. Using the wrong pods may cause the machine to malfunction and not brew properly.

Clean the Brewer And Unclog The Needle

Over time, coffee residue can build up in the brewer and clog the needle, leading to brewing issues. Regular cleaning is necessary to maintain optimal performance. Follow the manufacturer’s instructions for cleaning the brewer and unclogging the needle to ensure a smooth brewing process.

Reset The Keurig K-supreme Plus

If none of the above steps have resolved the issue, try resetting your Keurig K-Supreme Plus. To reset the machine, unplug it from the power source, wait for a few minutes, and then plug it back in. This can help resolve any minor internal glitch that may be causing the brewing problem.

By following these troubleshooting steps, you should be able to resolve the issue of your Keurig K-Supreme Plus not brewing and enjoy a fresh cup of coffee again.

2. Keurig K-supreme Plus Lights Flashing

If you are encountering an issue with your Keurig K-Supreme Plus coffee maker where the lights on the machine are flashing, don’t worry, we’ve got you covered. In this section, we will help you identify the specific light pattern, troubleshoot based on the flashing lights, and guide you through the process of resetting your Keurig K-Supreme Plus.

Identify The Specific Light Pattern

When the lights on your Keurig K-Supreme Plus are flashing, it is important to identify the specific light pattern to determine the cause of the issue. Take note of the sequence and duration of the flashing lights as it will help in troubleshooting the problem accurately. Here are some common light patterns you may encounter:

Troubleshoot Based On The Flashing Lights

Once you have identified the specific light pattern, you can troubleshoot the issue accordingly. Here are some troubleshooting steps based on the flashing lights:

• Flashing blue light: If the blue light is flashing, it means that the water reservoir needs to be refilled. Make sure to fill the reservoir to the recommended level and ensure it is properly seated in the machine.
• Flashing red light: If the red light is flashing, it indicates that the machine needs to be descaled. Follow the descaling instructions provided in the Keurig K-Supreme Plus manual to remove any mineral buildup and ensure proper functioning.
• Alternating flashing blue and red lights: If you see alternating flashing blue and red lights, it indicates that the machine needs to be reset. Resetting the Keurig K-Supreme Plus can often resolve minor issues. To reset the machine, follow these steps:
  1. Turn off the machine by pressing the power button.
  2. Unplug the machine from the power source.
  3. Wait for approximately 10 seconds.
  4. Plug the machine back in and turn it on.
  5. Check if the lights stop flashing and the machine functions properly.

By following these troubleshooting steps based on the flashing lights, you can resolve many common issues with your Keurig K-Supreme Plus coffee maker.

3. Keurig K-supreme Plus Brewing Inconsistently

Clean The K-cup® Pod Holder

If your Keurig K-Supreme Plus is brewing inconsistently, a common culprit could be a dirty K-Cup® pod holder. Over time, coffee grounds and residue can build up in this area, affecting the brew quality. To fix this issue, follow these steps:

1. Turn off and unplug your Keurig K-Supreme Plus.
2. Remove the K-Cup® pod holder by lifting the handle and pulling it out.
3. Wash the K-Cup® pod holder with warm, soapy water, ensuring to remove any coffee grounds or residue.
4. Rinse the holder thoroughly and allow it to air dry.
5. Once dry, reinsert the K-Cup® pod holder back into the brewer until it clicks into place.
6. Plug in your Keurig K-Supreme Plus and turn it on.

By cleaning the K-Cup® pod holder, you can improve the consistency of your brew and ensure a better coffee experience.

Descale The Brewer If Necessary

If cleaning the K-Cup® pod holder doesn’t resolve the inconsistent brewing issue, the next step is to descale your Keurig K-Supreme Plus. Descaling helps to remove mineral deposits that can accumulate over time and affect the performance of your brewer.

To describe your Keurig K-Supreme Plus, follow these steps:

1. Empty the water reservoir.
2. Mix a descaling solution according to the instructions provided by Keurig.
3. Pour the solution into the water reservoir.
4. Place a large mug or container on the drip tray to catch the solution.
5. Run a brewing cycle without a K-Cup® pod, ensuring to select the largest cup size.
6. Repeat the brewing cycle until the water reservoir is empty.
7. Flush the brewer by running multiple cycles with clean water.

Once the descaling process is complete, you can enjoy consistently brewed coffee from your Keurig K-Supreme Plus.

Check For Proper Power Button Activation

In certain cases, the brewing inconsistency of your Keurig K-Supreme Plus may be due to improper power button activation. Ensure that the power button has been turned on correctly by following these steps:

1. Check if the brewer is properly plugged into a functioning power outlet.
2. Make sure the power button is pressed firmly until it illuminates.
3. If the power button does not illuminate, unplug the brewer and wait for a few seconds before plugging it back in.
4. Press the power button again to activate the brewer.

Verifying the proper activation of the power button can help eliminate this potential cause of inconsistent brewing.

Contact Customer Service If Issues Persist

If you have tried the above troubleshooting steps and are still experiencing inconsistent brewing with your Keurig K-Supreme Plus, it may be time to reach out to customer service for further assistance. You can contact Keurig’s customer service team through their official website or helpline, providing them with a detailed description of the issue you are facing.

Customer service will be able to provide tailored support to resolve the problem and ensure you can enjoy a consistent and satisfying coffee experience with your Keurig K-Supreme Plus.

4. Keurig K-supreme Plus Not Powering On

If your Keurig K-Supreme Plus coffee maker is not powering on, there are a few troubleshooting steps you can try to resolve the issue. Here are some solutions to consider:

Ensure a Power Source Connection

The first thing you should check is the power source connection. Make sure that the power cord is securely plugged into an electrical outlet and that the outlet is working. You can try plugging another device into the same outlet to verify if it’s providing power. If the outlet is faulty, you may need to try a different one.

Check Power Button Activation

Next, check the power button on your Keurig K-Supreme Plus. Ensure that it is in the “on” position. Sometimes, the button may not have been fully engaged or could have been accidentally switched off. Toggle the power button to ensure it is in the correct position for powering the coffee maker.

Reset The Keurig K-supreme Plus

If the above steps don’t solve the issue, you can try resetting your Keurig K-Supreme Plus. To reset, follow these steps:

1. Unplug the coffee maker from the power source.
2. Wait for at least 30 seconds.
3. Plug the coffee maker back into the power source.
4. Try turning on the power button again.

This reset process can help resolve any temporary issues that may be preventing your Keurig K-Supreme Plus from powering on.

If you have followed these troubleshooting steps and your Keurig K-Supreme Plus still doesn’t power on, it may be time to contact customer support for further assistance. They can provide you with additional guidance and help you determine if there is a more significant issue with your coffee maker.

5. Keurig K-supreme Plus Error Messages

When it comes to troubleshooting your Keurig K-Supreme Plus, understanding the specific error messages is crucial. These error messages can provide valuable information about what might be causing issues with your coffee maker. By knowing how to interpret these error messages, you can quickly address the problem and get your Keurig K-Supreme Plus back up and running.

Understand The Specific Error Message

Each error message displayed on the Keurig K-Supreme Plus indicates a specific issue. By understanding the meaning behind each error message, you can identify the problem and take appropriate steps to resolve it. Here are some common error messages and their meanings:

Troubleshoot Based On The Error Code

Once you have identified the error message, you can troubleshoot the issue based on the specific error code. Here are some troubleshooting steps you can take:

1. E01: Ensure the water reservoir is properly filled and firmly seated on the machine. If the error persists, check for any obstructions in the water reservoir or the sensor area.
2. E02: Allow the machine to cool down for a few minutes before attempting to brew again. If the error code reappears, try unplugging the machine for a few minutes and then plug it back in to reset it.
3. E03: Clean the pump intake area and check for any blockages. If the problem persists, contact customer service for further assistance.
4. E04: Remove the K-Cup® pod holder and clean the needle thoroughly. Make sure no coffee grounds or debris are obstructing the needle.

Reset The Keurig K-supreme Plus

If troubleshooting based on the error code does not resolve the issue, resetting the Keurig K-Supreme Plus may help. Follow these steps to reset the coffee maker:

1. Turn off the machine and unplug it from the power source.
2. Remove the water reservoir and empty it.
3. Wait for a few minutes, then reinstall the water reservoir and plug the coffee maker back in.
4. Turn on the machine and try brewing a cup of coffee to see if the error message has disappeared.

By understanding the specific error messages, troubleshooting based on the error codes, and resetting the Keurig K-Supreme Plus, you can effectively resolve any issues you may encounter with your coffee maker. Remember to refer to the Keurig user manual or contact customer service for further assistance if needed.

Frequently Asked Questions

How do I reset my Keurig Supreme Plus?

To reset your Keurig Supreme Plus, follow these steps:1. Ensure the water reservoir is filled with the recommended amount of water. 2. Power on the machine. 3. Press and hold the “Strong” and “Hot Water” buttons simultaneously for 5 seconds.

4. Release the buttons and wait for the machine to reset. 5. Your Keurig Supreme Plus is now reset and ready to use again.

Why Did My Keurig Just Stop Working?

Possible short answer: The Keurig may have stopped working due to overfilling or using the wrong pods. Debris may have clogged the needle. Empty the drip tray, ensure the recommended water level, and try brewing again. If the problem persists, contact customer service.

Why Isn’t my Keurig working when I press The button?

If your Keurig isn’t working when you press the button, it may be due to overfilling, using the wrong pods, or debris clogging the needle. Make sure the water reservoir has the recommended amount of water, empty the drip tray, and try brewing again.

If the problem persists, contact customer service.

Why Is My K Supreme Plus Not Brewing A Full Cup?

If your K Supreme Plus is not brewing a full cup, it could be due to overfilling or using the wrong pods. Debris might also be clogging the needle. Make sure to empty the drip tray and try brewing with the recommended amount of water.

Clean the K-Cup pod holder and descale the machine. If the issue persists, contact customer service.

How do I reset my Keurig Supreme Plus?

To reset your Keurig Supreme Plus, simply unplug it from the power source, wait for a minute, and then plug it back in. This should reset the machine and resolve any minor issues.

Conclusion

If you’re experiencing issues with your Keurig K-Supreme Plus, don’t worry. The most common problem is slow brewing, which can be caused by a clogged needle or dirty water reservoir. To fix this, clean the needle and ensure the reservoir is clean.

If your machine doesn’t brew a full cup, try descaling it and making sure the power button is on. If all else fails, contact customer service for assistance. With these troubleshooting tips, you’ll have your Keurig K-Supreme Plus working perfectly in no time.